Dell Vostro 3591 Without optical drive Service Manual - Page 82
Virtualization support, Wireless, Maintenance screen
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Virtualization support Option Description Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilities provided by Intel Virtualization Technology. Enable Intel Virtualization Technology-enabled by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel® Virtualization technology for direct I/O. Enable VT for Direct I/O - enabled by default. Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and the Virtualization technology for direct I/O must be enabled to use this feature. Trusted Execution - disabled by default. Wireless Option Description Wireless Switch Wireless Device Enable Allows to set the wireless devices that can be controlled by the wireless switch. The options are: • WLAN • Bluetooth All the options are enabled by default. NOTE: For WLAN enable or disable controls are tied together and they cannot be enabled or disabled independently. Allows you to enable or disable the internal wireless devices. • WLAN • Bluetooth All the options are enabled by default. Maintenance screen Option Service Tag Asset Tag BIOS Downgrade Data Wipe BIOS Recovery Description Displays the Service Tag of your computer. Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by default. This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is not enabled by default. The following is list of devices affected: • Internal SATA HDD/SSD • Internal M.2 SATA SDD • Internal M.2 PCIe SSD • Internal eMMC This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard drive or an external USB key. • BIOS Recovery from Hard Drive-enabled by default • Always perform integrity check-disabled by default 82 System setup