Dell Vostro 3591 Without optical drive Service Manual - Page 36
Speakers, Removing the speakers
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [3]. Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the SD memory card 4. Follow the procedure in after working inside your computer Speakers Removing the speakers Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Remove the battery 5. Remove the SSD Steps 1. Disconnect the speaker cable from the system board [1]. 2. Unroute and remove the speaker cable from the routing guides on palm rest and keyboard assembly [2]. 3. Lift the speakers, along with the cable, off the palm rest and keyboard assembly [3]. 36 Removing and installing components