Dell Vostro 3901 Dell Vostro 3901 Owners Manual - Page 19
Installing the Power Switch, Removing the Input/Output (I/O) Panel
View all Dell Vostro 3901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Power Switch 1. Insert the power-switch cable through the front of the computer. 2. Push the power button into its slot and press it in, until it snaps into place. 3. Route the power-switch cable through the metal clip. 4. Connect the power-switch cable to the system board. 5. Install the: • bezel • cover 6. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: • cover • bezel 3. Follow the steps to remove the I/O panel cables: a. Disconnect the I/O panel and FlyWire cables from the system board [1, 3]. b. Un-thread the cables from the metal retention clips [2, 4]. 19
Installing the Power Switch
1.
Insert the power-switch cable through the front of the computer.
2.
Push the power button into its slot and press it in, until it snaps into place.
3.
Route the power-switch cable through the metal clip.
4.
Connect the power-switch cable to the system board.
5.
Install the:
•
bezel
•
cover
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
•
cover
•
bezel
3.
Follow the steps to remove the I/O panel cables:
a.
Disconnect the I/O panel and FlyWire cables from the system board [1, 3].
b.
Un-thread the cables from the metal retention clips [2, 4].
19