Dell Vostro 3905 Dell Vostro 3905 Owners Manual - Page 15

Installing the Memory, Removing the Heatsink Module, Removing the Processor, cover

Get Dell Vostro 3905 PDF manuals and user guides View all Dell Vostro 3905 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installing the Memory 1. Align the notch on the memory card with the tab in the memory connector. 2. Insert the memory module into the memory socket. 3. Press down on the memory module until the memory-retention tabs secure the memory in place. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Follow the steps to remove the processor heatsink module: a. Disconnect the heatsink-module cable from the system board. b. Loosen the captive screws that secure the heatsink module to the system board. c. Lift the heatsink module upward and remove it from the computer. Installing the Heatsink Module 1. Place the heatsink module on the processor. 2. Tighten the captive screws to secure the heatsink module to the system board. 3. Connect the heatsink-module cable to the connector on the system board. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: • cover • heatsink module 3. Push the processor release lever down and then press it outward to release it from the retention hook that secures it. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Installing the Memory
1.
Align the notch on the memory card with the tab in the memory connector.
2.
Insert the memory module into the memory socket.
3.
Press down on the memory module until the memory-retention tabs secure the memory in place.
4.
Install the
cover
.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink Module
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
Follow the steps to remove the processor heatsink module:
a.
Disconnect the heatsink-module cable from the system board.
b.
Loosen the captive screws that secure the heatsink module to the system board.
c.
Lift the heatsink module upward and remove it from the computer.
Installing the Heatsink Module
1.
Place the heatsink module on the processor.
2.
Tighten the captive screws to secure the heatsink module to the system board.
3.
Connect the heatsink-module cable to the connector on the system board.
4.
Install the
cover
.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
•
cover
•
heatsink module
3.
Push the processor release lever down and then press it outward to release it from the retention
hook that secures it.
15