Dell Vostro 5300 Service Manual - Page 24

Steps, Connectors on the wireless card, Antenna-cable color, Next steps

Get Dell Vostro 5300 PDF manuals and user guides View all Dell Vostro 5300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Steps 1. Lift the mylar that covers the wireless-card slot. 2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless- card slot. 3. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black 4. Adhere the tape that secures the wireless card to the system board. 5. Align and place the wireless-card bracket on the wireless card. 6. Replace the screw (M2x2.5) to secure the wireless-card bracket to the wireless card. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 24 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Steps
1.
Lift the mylar that covers the wireless-card slot.
2.
Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-
card slot.
3.
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
4.
Adhere the tape that secures the wireless card to the system board.
5.
Align and place the wireless-card bracket on the wireless card.
6.
Replace the screw (M2x2.5) to secure the wireless-card bracket to the wireless card.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
24
Removing and installing components