Dell Vostro 5300 Service Manual - Page 36
Power-adapter port, Removing the power-adapter port
View all Dell Vostro 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Steps 1. Align the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board. 3. Adhere the mylar that covers the heat sink on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the display assembly. 36 Removing and installing components
Steps
1.
Align the screw holes on the heat sink with the screw holes on the system board.
2.
In sequential order (as indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
3.
Adhere the mylar that covers the heat sink on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Power-adapter port
Removing the power-adapter port
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
display assembly
.
36
Removing and installing components