Dell Vostro 5481 Service Manual - Page 41

Display assembly, Removing the display assembly

Get Dell Vostro 5481 PDF manuals and user guides View all Dell Vostro 5481 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3. Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3]. 4. Affix the adhesive tape to secure the IO board connector [4]. 5. Connect the fingerprint reader cable to the connector on the IO board [5]. NOTE: This step is applicable only to the systems that are shipped with power button with fingerprint reader. 6. Install the: a) system fan b) battery c) base cover 7. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery c) WLAN d) system fan 3. To remove the display assembly: a) Peel the adhesive tape that secures the IO board cable to the IO board connector [1]. b) Open the IO board connector latch and disconnect the IO board cable from the connector on the IO board [2]. c) Peel the adhesive tape that secures the display cable to the display cable connector [3]. d) Open the display cable connector latch and disconnect the display cable from the connector on the system board [4]. Removing and installing components 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
3.
Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3].
4.
Affix the adhesive tape to secure the IO board connector [4].
5.
Connect the fingerprint reader cable to the connector on the IO board [5].
NOTE:
This step is applicable only to the systems that are shipped with power button with fingerprint reader.
6.
Install the:
a)
system fan
b)
battery
c)
base cover
7.
Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a)
base cover
b)
battery
c)
WLAN
d)
system fan
3.
To remove the display assembly:
a)
Peel the adhesive tape that secures the IO board cable to the IO board connector [1].
b)
Open the IO board connector latch and disconnect the IO board cable from the connector on the IO board [2].
c)
Peel the adhesive tape that secures the display cable to the display cable connector [3].
d)
Open the display cable connector latch and disconnect the display cable from the connector on the system board [4].
Removing and installing components
41