Dell Vostro 5581 Service Manual - Page 44
Installing the Input and Output board
View all Dell Vostro 5581 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing the Input and Output board 1 Align and place the IO board to the slot on the palmrest and keyboard assembly [1]. 2 Replace the two (M2x3) screws to secure the IO board to the palmrest and keyboard assembly [2]. 3 Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3]. 4 Affix the adhesive tape to secure the IO board connector [4]. 5 Connect the fingerprint reader cable to the connector on the IO board [5]. 44 Removing and installing components
Installing the Input and Output board
1
Align and place the IO board to the slot on the palmrest and keyboard assembly [1].
2
Replace the two (M2x3) screws to secure the IO board to the palmrest and keyboard assembly [2].
3
Connect the IO board cable to the connector on the IO board and close the IO board connector latch [3].
4
Affix
the adhesive tape to secure the IO board connector [4].
5
Connect the
fingerprint
reader cable to the connector on the IO board [5].
44
Removing and installing components