Dell Vostro 5581 Service Manual - Page 45

Display assembly, Removing the display assembly

Get Dell Vostro 5581 PDF manuals and user guides View all Dell Vostro 5581 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

NOTE: This step is applicable only to the systems that are shipped with power button with fingerprint reader. 6 Install the: a system fan b battery c base cover 7 Follow the procedure in After working inside your computer. Display assembly Removing the display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b battery c WLAN 3 To remove the display assembly: a Peel the adhesive that secures the WLAN antenna cable to the palmrest and keyboard assembly [1]. b Unroute the WLAN antenna cable from the routing channel [2]. c Peel the adhesive tape that secures the display cable to the display cable connector [3]. d Open the display cable connector latch and disconnect the display cable from the connector on the system board [4]. e Unroute the display cable from the routing channel [5]. Removing and installing components 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
NOTE:
This step is applicable only to the systems that are shipped with power button with
fingerprint
reader.
6
Install the:
a
system fan
b
battery
c
base cover
7
Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
battery
c
WLAN
3
To remove the display assembly:
a
Peel the adhesive that secures the WLAN antenna cable to the palmrest and keyboard assembly [1].
b
Unroute the WLAN antenna cable from the routing channel [2].
c
Peel the adhesive tape that secures the display cable to the display cable connector [3].
d
Open the display cable connector latch and disconnect the display cable from the connector on the system board [4].
e
Unroute the display cable from the routing channel [5].
Removing and installing components
45