Dell W-Series 205H AP-205H-MNT2 Wall Mount Kit Installation Guide - Page 1

205H-MNT2 Wall Mount Kit Installation Guide Package Contents  Dual Gang Wall Mount  (x4) #6-32 Machine Screws  Plastic Front Cover  (x2) T8H Torx Security Screw  205H-MNT2 Wall Mount Kit Installation Guide Introduction The 205H-MNT2 Wall Mount Kit provides a secure and practical solution for mounting the 205H access point to single and dual gang wall boxes. Installing the 205H-MNT2 Wall Mount Kit Use the following instructions to install the 205H-MNT2 Wall Mount Kit. 1. If the wall box is not already exposed, unscrew and remove the existing wall plate, as shown in Figure 1. Figure 1 Removing Existing Wall Plate 2. Detach any RJ-45 cables by unclipping the connectors from the wall plate, or cutting/removing the UTP cable(s). 3. Use a short Ethernet cable (sold separately, part number AP-CBL-ETH10) to connect the E0 port to an RJ-45 connector, or crimp an RJ-45 plug (not supplied) to the cable, and insert into the E0 port. Do the same for the PT port if used. 0511763-03 | March 2015 1