Dell W-Series 228 Instant 6.4.3.1-4.2 User Guide - Page 101
In the CLI, Configuring VLAN Settings for a WLAN, SSID Profile
View all Dell W-Series 228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Table 20: WLAN Configuration Parameters Parameter Description Inactivity timeout Specify an interval for session timeout in seconds, minutes or hours. If a client session is inactive for the specified duration, the session expires and the users are required to log in again. You can specify a value within the range of 60-86400 seconds or up to 24 hours for a client session. The default value is 1000 seconds. Hide SSID Select this checkbox if you do not want the SSID (network name) to be visible to users. Disable SSID Select this checkbox if you want to disable the SSID. On selecting this, the SSID will be disabled, but will not be removed from the network. By default, all SSIDs are enabled. Can be used without Uplink Select the checkbox if you do not want to SSID profile to use uplink. Max clients threshold Specify the maximum number of clients that can be configured for each BSSID on a WLAN. You can specify a value within the range of 0 to 255. The default value is 64. Local probe request threshold Specify a threshold value to limit the number of incoming probe requests. When a client sends a broadcast probe request frame to search for all available SSIDs, this option controls system response for this network profile and ignores probe requests if required. You can specify a Received signal strength indication (RSSI) value within range of 0 to 100 dB. SSID Encoding To enable SSID encoding, select UTF8. By default, the SSIDs are not encoded. ESSID Enter the ESSID. If the value defined for ESSID value is not the same as profile name, the SSIDs can be searched based on the ESSID value and not by its profile name. 5. Click Next to configure VLAN settings. For more information, see Configuring VLAN Settings for a WLAN SSID Profile on page 102. In the CLI To configure WLAN settings for an SSID profile: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# essid (Instant AP)(SSID Profile )# type {|| } (Instant AP)(SSID Profile )# broadcast-filter (Instant AP)(SSID Profile )# dtim-period (Instant AP)(SSID Profile )# multicast-rate-optimization (Instant AP)(SSID Profile )# dynamic-multicast-optimization (Instant AP)(SSID Profile )# dmo-channel-utilization-threshold (Instant AP)(SSID Profile )# a-max-tx-rate (Instant AP)(SSID Profile )# a-min-tx-rate (Instant AP)(SSID Profile )# g-max-tx-rate (Instant AP)(SSID Profile )# g-min-tx-rate (Instant AP)(SSID Profile )# zone (Instant AP)(SSID Profile )# bandwidth-limit (Instant AP)(SSID Profile )# per-user-bandwidth-limit (Instant AP)(SSID Profile )# air-time-limit (Instant AP)(SSID Profile )# wmm-background-dscp (Instant AP)(SSID Profile )# wmm-background-share (Instant AP)(SSID Profile )# wmm-best-effort-dscp (Instant AP)(SSID Profile )# wmm-best-effort-share (Instant AP)(SSID Profile )# wmm-video-dscp Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Wireless Network Profiles | 101