Dell W-Series 228 Instant 6.4.3.1-4.2 User Guide - Page 124

(Instant AP)(wired ap profile )# set-role-machine-auth (Instant AP)(wired ap profile )# end (Instant AP)# commit apply To configure unrestricted access: (Instant AP)(config)# wired-port-profile (Instant AP)(wired ap profile )# set-role-unrestricted (Instant AP)(wired ap profile )# end (Instant AP)# commit apply Assigning a Profile to Ethernet Ports You can assign profiles to Ethernet ports using the Instant UI or CLI. In the Instant UI To assign profiles to Ethernet ports: 1. Click the Wired link under More at the top right corner of the Instant main window. The Wired window is displayed. 2. To assign an Ethernet downlink profile to Ethernet 0 port: a. Ensure that the wired bridging on the port is enabled. For more information, see Configuring Wired Bridging on Ethernet 0 for Mesh Point on page 327. b. Select and assign a profile from the 0/0 drop down list. c. To assign a wired profile to Ethernet 0/1 port, select the profile from the 0/1 drop down list. d. If the W-IAP supports E2, E3 and E4 ports, assign profiles to other Ethernet ports by selecting a profile from the 0/2, 0/3, and 0/4 drop-down list. In the CLI To assign profiles to Ethernet ports: (Instant AP)(config)# enet0-port-profile (Instant AP)(config)# enet1-port-profile (Instant AP)(config)# enet2-port-profile (Instant AP)(config)# enet3-port-profile (Instant AP)(config)# enet4-port-profile (Instant AP)(config)# end (Instant AP)# commit apply Editing a Wired Profile To edit a wired profile: 1. Click the Wired link under More at the top right corner of the Instant main window. The Wired window is displayed. 2. In the Wired window, select the wired profile to modify. 3. Click Edit. The Edit Wired Network window is displayed. 4. Modify the required settings. 5. Click Finish to save the modifications. Deleting a Wired Profile To delete a wired profile: 124 | Wired Profiles Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide