Dell W-Series 228 Instant 6.4.3.1-4.2 User Guide - Page 269

(Instant AP)(Access Rule )#rule {app {permit|deny} |appcategory }[] (Instant AP)(Access Rule )# end (Instant AP)# commit apply Example (Instant AP)(config)# wlan access-rule employee (Instant AP)(Access Rule "employee")# rule any any match app uoutube permit throttledownstream 256 throttle-up 256 (Instant AP)(Access Rule "employee")# rule any any match appcategory collaboration permit (Instant AP)(Access Rule "employee")# end (Instant AP)# commit apply Configuring Web Policy Enforcement Service You can configure Web Policy Enforcement service on a W-IAP to block certain categories of websites based on your organization specifications by defining ACL rules either through the Instant UI or CLI. In the Instant UI 1. Navigate to Security >Roles. 2. Select any WLAN SSID or wired profile role, and click New in the Access Rules section. The New Rule window appears. 3. Select the rule type as Access Control. 4. To set an access policy based on the web category: a. Under Services, select Web category and expand the Web categories drop-down. Figure 72 b. Select the categories to which you want to deny or allow access. You can also search for a web category and select the required option. c. From the Action drop-down, select Allow or Deny as required. d. Click OK. 5. To filter access based on the security ratings of the website: a. Select Web reputation under Services. b. Move the slider to the required security rating level. Move the slider to select a specific web reputation value to deny access to websites with a reputation value lower than or equal to the configured value or to permit access to websites with a reputation value higher than or equal to the configured value. The following options are available: 269 | Deep Packet Inspection and Application Visibility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide