Dell W-Series 277 Instant 6.5.1.0-4.3.1.0 User Guide - Page 197

Configuring Machine and User Authentication Roles You can assign different rights to clients based on whether their hardware device supports machine authentication. Machine authentication is only supported on Windows devices, so that this can be used to distinguish between Windows devices and other devices such as iPads. You can create any of the following types of rules: l Machine Auth only role-This indicates a Windows machine with no user logged in. The device supports machine authentication and has a valid RADIUS account, but a user has not yet logged in and authenticated. l User Auth only role-This indicates a known user or a non-Windows device. The device does not support machine authentication or does not have a RADIUS account, but the user is logged in and authenticated. When a device does both machine and user authentication, the user obtains the default role or the derived role based on the RADIUS attribute. You can configure machine authentication with role-based access control using the Instant UI or the CLI. In the Instant UI To configure machine authentication with role-based access control: 1. In the Access tab of the WLAN wizard (New WLAN or Edit ) or in the wired profile configuration window (New Wired Network or Edit Wired Network), under Roles, create Machine auth only and User auth only roles. 2. Configure access rules for these roles by selecting the role, and applying the rule. For more information on configuring access rules, see Configuring ACL Rules for Network Services on page 178. 3. Select Enforce Machine Authentication and select the Machine auth only and User auth only roles. 4. Click Finish to apply these changes. In the CLI To configure machine and user authentication roles for a WLAN SSID: (Instant AP)(config)# wlan ssid-profile (Instant AP)(SSID Profile )# set-role-machine-auth (Instant AP)(SSID Profile )# end (Instant AP)# commit apply To configure machine and user authentication roles for a wired profile: (Instant AP)(config)# wired-port-profile (Instant AP)(wired ap profile )# set-role-machine-auth (Instant AP)(wired ap profile )# end (Instant AP)# commit apply Configuring Derivation Rules Instant allows you to configure role and VLAN derivation-rules. You can configure these rules to assign a user role or a VLAN to the clients connecting to an SSID or a wired profile. Understanding Role Assignment Rule When an SSID or a wired profile is created, a default role for the clients connecting to this SSID or wired profile is assigned. You can assign a user role to the clients connecting to an SSID by any of the following methods. The role assigned by some methods may take precedence over the roles assigned by the other methods. 197 | Roles and Policies Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide