Dell W-Series 277 Instant 6.5.1.0-4.3.1.0 User Guide - Page 323
Uplink Preferences and Switching, Enforcing Uplinks
View all Dell W-Series 277 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
10.Navigate to System > General > Show Advanced Options view and set the Extended SSID parameter to Disabled. 11.Reboot the W-IAP to apply the changes. After the W-IAP reboot, the Wi-Fi and mesh links are automatically enabled. In the CLI To configure Wi-Fi uplink on a W-IAP: (Instant AP)(config) # wlan sta-profile (Instant AP)(sta uplink)# cipher-suite (Instant AP)(sta uplink)# essid (Instant AP)(sta uplink)# uplink-band (Instant AP)(sta uplink)# wpa-passphrase (Instant AP)(sta uplink)# end (Instant AP)# commit apply To view the W-Fi uplink status in the CLI: (Instant AP)# show wifi-uplink status configured :NO To view the configuration status in the CLI: (Instant AP)# show wifi-uplink config ESSID : Cipher Suite : Passphrase : Band : (Instant AP)# show wifi-uplink auth log wifi uplink auth configuration wifi uplink auth log 1116]2000-01-01 00:00:45.625: Global control interface '/tmp/supp_gbl' Uplink Preferences and Switching This topic describes the following procedures: l Enforcing Uplinks on page 323 l Setting an Uplink Priority on page 324 l Enabling Uplink Preemption on page 324 l Switching Uplinks Based on VPN and Internet Availability on page 325 l Viewing Uplink Status and Configuration on page 327 Enforcing Uplinks The following configuration conditions apply to the uplink enforcement: l When an uplink is enforced, the W-IAP uses the specified uplink as the primary uplink regardless of uplink preemption configuration and the current uplink status. l When an uplink is enforced and multiple Ethernet ports are configured ,and if the uplink is enabled on the wired profiles, the W-IAP tries to find an alternate Ethernet link based on the priority configured. 323 | Uplink Configuration Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide