Dell W-Series 277 Instant 6.5.1.0-4.3.1.0 User Guide - Page 348
Access Points, Radio, Access Mode, Spectrum Monitor, Show advanced options, Lower, Middle, Higher
View all Dell W-Series 277 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
You can configure a W-IAP to function as a stand-alone spectrum monitor by using the Instant UI or the CLI. In the Instant UI To convert a W-IAP to a spectrum monitor: 1. In the Access Points tab, click the W-IAP that you want to convert to a spectrum monitor. 2. Click the edit link. 3. Click the Radio tab. 4. From the Access Mode drop-down list, select Spectrum Monitor. 5. Click OK. 6. Reboot the W-IAP for the changes to take effect. 7. To enable spectrum monitoring for any other band for the 5 GHz radio: a. Click the RF link on the Instantmain window. b. In the RF section, click Show advanced options to view the Radio tab. c. For the 5 GHz radio, specify the spectrum band you want that radio to monitor by selecting Lower, Middle, or Higher from the Standalone spectrum band drop-down list. d. Click OK. In the CLI To convert a W-IAP to a spectrum monitor: (Instant AP)# wifi0-mode { | | } (Instant AP)# wifi1-mode { | | } To enable spectrum monitoring for any other band for the 5 GHz radio: (Instant AP)(config)# rf dot11a-radio-profile (Instant AP)(RF dot11a Radio Profile)# spectrum-band To view the radio configuration: (Instant AP)# show radio config 2.4 GHz: Legacy Mode:disable Beacon Interval:100 802.11d/802.11h:disable Interference Immunity Level:2 Channel Switch Announcement Count:0 Channel Reuse Type:disable Channel Reuse Threshold:0 Background Spectrum Monitor:disable 5.0 GHz: Legacy Mode:disable Beacon Interval:100 802.11d/802.11h:disable Interference Immunity Level:2 Channel Switch Announcement Count:0 Channel Reuse Type:disable Channel Reuse Threshold:0 Background Spectrum Monitor:disable Standalone Spectrum Band:5ghz-upper 348 | Spectrum Monitor Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide