Dell Wyse 3020 Monitor mount for 2017 P-series monitors Installation guide - Page 8
Remove the monitor screws from the back of the monitor
View all Dell Wyse 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5 Attaching P-series mount to the monitor • Remove the monitor screws from the back of the monitor, and use them when you proceed with installation later. • Position the P-series mount on the back of the monitor. Tilt and slide the top tabs into the dedicated tab slots, and then firmly slide down bottom edge of mount until it snaps in place. • Reinstall the monitor screws. 8 Mounting Wyse 5010, Wyse 5020, and Wyse 5060 clients
5
Attaching P-series mount to the monitor
•
Remove the monitor screws from the back of the monitor, and use them when you proceed with installation later.
•
Position the P-series mount on the back of the monitor. Tilt and slide the top tabs into the dedicated tab slots, and then
firmly
slide down bottom edge of mount until it snaps in place.
•
Reinstall the monitor screws.
8
Mounting Wyse 5010, Wyse 5020, and Wyse 5060 clients