Dell Wyse 3030 LT Monitor mount for 2016 E-series and E2417H monitors Installa
Dell Wyse 3030 LT Manual
View all Dell Wyse 3030 LT manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Wyse 3030 LT manual content summary:
- Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 1
Monitor mount for 2016 E-series and E2417H Dell monitors Installation guide - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 2
tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 3
Contents 1 Supported clients and monitors...4 2 Included in the tool kit...5 3 Mounting the client...6 4 Mounting Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients 10 Contents 3 - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 4
or clients. Supported clients are: • Dell Wyse 3010 (Tx0) thin client • Dell Wyse 3020 (Tx0D) thin client • Dell Wyse 3030 (N03D) thin client • Dell Wyse 3030LT (N06D) thin client • Dell Wyse 5010 (Dx0D) thin client • Dell Wyse 5020 (DxoQ) thin client • Dell Wyse 5030 (PxN) PCoIP zero client • Dell - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 5
extender 2 Included in the tool kit NOTE: Dell Wyse 3010 client requires horizontal stand 452-BCMF with the E-series mount. Dell Wyse 3020 and 5030 clients require horizontal stand 452-BCMH with E-series mount. Dell Wyse 3030 and 3030LT clients require horizontal stand 452-BCMG with E-series mount - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 6
3 Mounting the client Use the following instructions to attach the client to the E-series mount: 1 Preparing the client-Use a Phillips-head screwdriver to remove the filler screws from the side of the client and replace them with the shoulder screws. 2 Removing the cover plates and screws from the - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 7
3 Attaching the base extender-Slide the base extender onto the monitor stand and use the screws provided in the tool kit to secure the base extender to the monitor stand. Mounting the client 7 - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 8
locations. CAUTION: Do not overtighten the screws. 5 Attaching the client-Slightly tip the client to align and insert the four protruding shoulder screws into the cutout areas of the E- series mount. Slide the client until it snaps into place. The security latch moves automatically - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 9
6 Connecting cables-To complete your setup, make all the desired connections, and then plug the AC power cord into an AC wall outlet. NOTE: To remove the client, gently pull the security latch to the right to release shoulder screws and slide the client from mount. Mounting the client 9 - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 10
4 Mounting Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients Use the following instructions for mounting the Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients to the E-series monitor mount. These thin clients require mounting of the thin client to their - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 11
four screws from the back of the monitor. Position the E mount on the back of the monitor, and attach it using the same screws. Mounting Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients 11 - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 12
12 Mounting Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients - Dell Wyse 3030 LT | Monitor mount for 2016 E-series and E2417H monitors Installa - Page 13
4 Attaching the client-Align the client, and insert the shoulder screws into the four cut-out areas of the mount. The security make all the desired connections, and then plug the AC power cord into an AC wall outlet. Mounting Wyse 3010, Wyse 3020, Wyse 3030, Wyse 3030LT, and Wyse 5030 clients 13
Monitor mount for 2016 E-series and E2417H Dell
monitors
Installation guide