Dell XPS 13 9300 Service Manual - Page 28

Steps

Get Dell XPS 13 9300 PDF manuals and user guides View all Dell XPS 13 9300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Steps 1. Slide the palm-rest and keyboard assembly under the display-assembly hinges. 2. Align the screw holes on the palm-rest assembly with the screw holes on the display hinges. 3. Replace the three screws (M2.5x4.5) that secure the left hinge to the system board and the palm-rest and keyboard assembly. 4. Replace the three screws (M2.5x4.5) that secure the right hinge to the system board and the palm-rest and keyboard assembly. 5. Align the screw holes on the display-assembly cable holder with the screw holes on the palm-rest and keyboard assembly. 6. Replace the three screws (M1.2x2) that secure the display-assembly cable holder to the palm-rest and keyboard assembly. NOTE: Apply gentle torque when tightening the three screws (M1.2x2) to avoid damaging the screw threads. 7. Connect the camera cable and the display cable to the system board. 8. Align the screw holes on the display-assembly bracket with the screw holes on the system board and tighten the three captive screws. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 28 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Steps
1.
Slide the palm-rest and keyboard assembly under the display-assembly hinges.
2.
Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
3.
Replace the three screws (M2.5x4.5) that secure the left hinge to the system board and the palm-rest and keyboard assembly.
4.
Replace the three screws (M2.5x4.5) that secure the right hinge to the system board and the palm-rest and keyboard assembly.
5.
Align the screw holes on the display-assembly cable holder with the screw holes on the palm-rest and keyboard assembly.
6.
Replace the three screws (M1.2x2) that secure the display-assembly cable holder to the palm-rest and keyboard assembly.
NOTE:
Apply gentle torque when tightening the three screws (M1.2x2) to avoid damaging the screw threads.
7.
Connect the camera cable and the display cable to the system board.
8.
Align the screw holes on the display-assembly bracket with the screw holes on the system board and tighten the three captive screws.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
28
Removing and installing components