Dell XPS 13 9300 Service Manual - Page 41
Keyboard Backlight Timeout on AC, Thunderbolt Adapter Configuration
View all Dell XPS 13 9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
System Configuration SATA Operation Drive Information Enable SMART Reporting Enable Audio Enable Microphone Enable Internal Speaker USB Configuration Thunderbolt Adapter Configuration Enable Thunderbolt Technology Support Enable Thunderbolt Boot Support EnableThunderbolt (and PCIe behind TBT) pre-boot modules Miscellaneous Devices Enable Camera Touchscreen Enable Fingerprint Reader Device Enable MediaCard Keyboard Illumination Keyboard Backlight Timeout on AC Default: ON Configures operating mode of the integrated SATA hard drive controller. Default: RAID On. SATA is configured to support RAID (Intel Rapid Restore Technology). Displays the information of various onboard drives. Enables or disables Self-Monitoring, Analysis, and Reporting Technology (SMART). Default: OFF Enables or disables all integrated audio controller. Default: ON Enables or disables microphone. By default, Enable Microphone is selected. Enables or disables internal speaker. By default, Enable Internal Speaker is selected. Enables or disables booting from USB mass storage devices such as external hard drive, optical drive, and USB drive. By default, Enable USB Boot Support is selected. By default, Enable External USB Ports is selected. Enables or disables Thunderbolt Technology Support. Default: ON Enables or disables Thunderbolt Boot Support. Default: OFF Enables or disables to allow or disallow PCIe devices to be connected through a Thunderbolt adapter during pre-boot. Default: OFF Enables or disables various onboard devices. Enables or disables the camera. By default, Enable Camera is selected. Enables or disables the touchscreen. By default, Touchscreen is selected. Enables or disables the Fingerprint Reader Device. By default, Enable Fingerprint Reader Device is selected. Enables to switch all media cards On/Off or set the media card to read-only state. By default, Enable Secure Digital (SD) Card is selected. Configures the operating mode of the keyboard illumination feature. Default: Bright. Enable the keyboard illumination feature at 100% brightness level. Configures the timeout value for the keyboard when an AC adapter is connected to the computer. The keyboard backlight timeout value is only effect when the backlight is enabled. Default: 10 seconds System setup 41