Dell XPS 13 9300 Service Manual - Page 32
Installing the system board
![]() |
View all Dell XPS 13 9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the system board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. About this task The following image indicates the connectors on your system board. Figure 2. System-board connectors 1. Power-button cable 3. Right speaker cable 5. Left speaker cable 2. Touchpad cable 4. Keyboard cable The following images indicate the location of the system board and provide a visual representation of the installation procedure. 32 Removing and installing components
![](/manual_guide/products/dell-xps-13-9300-service-manual-18866d1/32.png)