Dell XPS 15 9500 Service Manual - Page 19
Solid-state drive, Removing the solid-state drive1
View all Dell XPS 15 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly at an angle, into the memory-module slot. 3. Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. NOTE: Repeat step 1 to step 3 to install the other memory module if available on your computer. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Solid-state drive Removing the solid-state drive1 Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is turned on or is in sleep state. 2. Remove the base cover. About this task The following image indicates the location of the solid-state drive1 and provides a visual representation of the removal procedure. Removing and installing components 19