Dell XPS 15 9500 Service Manual - Page 20
Installing the solid-state drive1
View all Dell XPS 15 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Steps 1. Remove the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive1 to the system board. 2. Slide the solid-state drive thermal bracket from the alignment post and lift it from the system board. 3. Slide and remove the solid-state drive1 from the solid-state drive slot. NOTE: The size of the solid-state drive thermal bracket varies based on the storage type. A solid-state drive thermal bracket that is designed for an M.2 2280 drive cannot accommodate an M.2 2230 drive and vice versa. Installing the solid-state drive1 Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. About this task The following image indicates the location of the solid-state drive1 and provides a visual representation of the installation procedure. 20 Removing and installing components