Dell XPS 15 9500 Service Manual - Page 34

Display assembly, Removing the display assembly

Get Dell XPS 15 9500 PDF manuals and user guides View all Dell XPS 15 9500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw hole on the USB Type-C port bracket with the screw hole on the system board. 3. Connect the screw (M2x4) that secures the USB Type-C port bracket to the system board. NOTE: Ensure to connect IO marked side of the I/O-board cable to the I/O daughter board and the side marked MB to the system board. 4. Connect the I/O-board cable to the connector on the system board and I/O board. Next steps 1. Install the right fan. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following images indicate the location of the display assembly cable and display-assembly hinges and provide a visual representation of the removal procedure. 34 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Steps
1.
Place the I/O board on the palm-rest and keyboard assembly.
2.
Align the screw hole on the USB Type-C port bracket with the screw hole on the system board.
3.
Connect the screw (M2x4) that secures the USB Type-C port bracket to the system board.
NOTE:
Ensure to connect IO marked side of the I/O-board cable to the I/O daughter board and the side marked MB
to the system board.
4.
Connect the I/O-board cable to the connector on the system board and I/O board.
Next steps
1.
Install the
right fan
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
About this task
The following images indicate the location of the display assembly cable and display-assembly hinges and provide a visual representation of
the removal procedure.
34
Removing and installing components