Denon 3310CI Owners Manual Addendum - English - Page 17

Getting Started Connections Settings Playback Information Unavailable Functions After Upgrading Specifications Setting items Manual EQ Use the graphic equalizer to adjust the tone of each speaker. Setting contents Adjust CH : Correct the tone of each speaker. q Select the speaker tone adjustment method. All : Adjust the tone of all speakers together. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz b Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB ~ +6.0dB (0.0dB) Can be set when the "MultEQ" setting (vpage 13) is "Manual". Base Curve Copy : Copy "Audyssey Flat" curve from MultEQ. Yes : Copy. No : Do not copy. "Base Curve Copy" is displayed after Audyssey Auto Setup procedure has been performed. Default : Reset the settings to the default values. • Yes : Reset. • No : Do not Reset. RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound. OFF : Do not use RESTORER. Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs. Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources. Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs. • This can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input. • This cannot be set when the input mode is set to "EXT. IN" or when the surround mode is set to "DIRECT". • The default setting for "iPod" and "NET/USB" are "Mode 3". All others are set to "OFF". • When set to something other than "OFF", " " is displayed. • This can also be set by pressing RESTORER during playback. OFF Mode 1 Mode 2 (RESTORER 64) (RESTORER 96) Mode 3 (RESTORER HQ) ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items RESTORER (Continued) Setting contents About the RESTORER function • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. • This is displayed on the GUI menu and can be set when the input source is set to "HD Radio" or "NET/USB", or when analog signals (including FM/AM signals) or PCM signals (fs = 44.1/48 kHz) are input. Audio Delay While viewing video, manually adjust the time to delay audio output. 0ms ~ 200ms • This can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when a TV compatible with Auto Lipsync is connected. • Store "Audio Delay" for each input source. • You can also press to set. Main remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu 16