Denon 3310CI Owners Manual Addendum - English - Page 20
Connecting Devices, Making Detailed Settings, Manual Setup - receivers
UPC - 883795001038
View all Denon 3310CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started Connections Settings Playback Information Unavailable Functions After Upgrading Specifications ENGLISH Unavailable Functions After Upgrading When upgrading, the RS-232C connector cannot be used for the DENON RF remote controller. Connecting Devices External Controller vpage 22 of GThe original versionH Operating Instructions n RS-232C connector When you connect an external control device, you can control the AVR-3310CI with the external control device. Perform the operation below beforehand. q Turn on the AVR-3310CI's power. w Turn off the AVR-3310CI's power from the external controller. e Check that the AVR-3310CI is in the standby mode. When upgrading, the DENON RF remote controller cannot be connected. Making Detailed Settings (Manual Setup) OPTION Making Other Settings (Option Setup) vpage 43 of GThe original versionH Operating Instructions When upgrading, this setting cannot be selected. Setting items Setting contents 232C Port Serial Control : Set when using an external controller. Set when using an external 2Way Remote : Set when using a 2-way remote control unit. controller or two-way remote control connected to the RS232C terminal. When using a DENON two-way remote control (RC-7000CI or RC7001RCI, sold separately), set to "2Way Remote". NOTE When setting to "2Way Remote", you can not use the RS-232C connector as an external controller. Set as Necessary Set this to use the RS-232C connector for the DENON RF remote controller. "232C Port" When using the AVR-3310CI in combination with the DENON RF remote controller (RC-7000CI, sold separately) or RF remote receiver (RC-7001RCI, sold separately), two-way communication is enabled. The AVR-3310CI's status information as well as iPod and Internet audio music files can be browsed watching the RF Remote Controller's display. For details, refer to the operating instructions of the respective devices. NOTE On the GUI menu, when setting "232C Port" to "2Way Remote", you cannot use the RS-232C connector as an external controller. 19