Denon 3310CI Owners Manual Addendum - English - Page 9

Getting Started Connections Settings Playback Information Unavailable Functions After Upgrading Specifications Making Detailed Settings (Manual Setup) For details on how to select, set and cancel settings for each menu, see "GUI Menu Operation" (vpage 26 of GThe original versionH Operating Instructions). When upgrading, contents of "Speaker Setup" are modified. For setting "Speaker Setup", make settings by referring to this manual but not GThe original versionH Operating Instructions. Making the Speaker Settings (Speaker Setup) Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. Setting items Setting contents Amp Assign Normal : The surround back channel audio signals are output. Sets the signal output to the ZONE2 : The ZONE2 audio signals are output. speaker connected to the ZONE3 : The ZONE3 audio signals are output. SURR. BACK/AMP ASSIGN ZONE2/3-MONO : The ZONE2 / ZONE3 monaural audio signals are terminals. output. Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front A speakers. Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front B speakers. Front Height : The front height channel audio signals are output. Front Wide : The front wide channel audio signals are output. Since "Amp Assign" of AVR-3310CI is set to "ZONE2" by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the "Amp Assign" setting to "Normal". ENGLISH Setting items Setting contents Speaker Configuration Front : Set the front speaker size. Select speaker configuration • Large : Use of a large speaker that can adequately playback low and size (bass reproduction frequencies. capability). • Small : Use of a small speaker that has inadequate playback capacity for NOTE low frequencies. Select "Large" or "Small" not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at "Crossover Frequency" (vpage 10). • When "Subwoofer" is set to "No", "Front" can automatically set to "Large". • When "Front" is set to "Small", "Center", "Surround", "Surround Back", "Front Height" and "Front Wide" can not be set to "Large". Center : Set the presence and size of the center speaker. • Large : Use of a large speaker that can adequately playback low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" can automatically set to "Yes". Surround : Set the presence and size of the surround speakers. • Large : Use of a large speaker that can adequately playback low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "Surround Back", "Front Height" and "Front Wide" can be set to "Large". • When "Surround" is set to "None", "Surround Back", "Front Height" and "Front Wide" can automatically set to "None". Main remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting See overleaf :Return to previous menu