Denon 3310CI Owners Manual Addendum - English - Page 7

Getting Started Connections Settings Playback Information Unavailable Functions After Upgrading Specifications ENGLISH Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. n Audyssey Auto Setup Flow a C onnect the Included Setup Microphone s A udyssey Auto Setup Preparations n Change the Amplifier Assignment (Amp Assign) (vpage 7) When upgrading, contents of "Amp Assign" are modified. n Set the channel to be measured (Channel Select) d Perform Audyssey Auto Setup Important Information Audyssey MultEQ® automatically measures the acoustical problems in the listening environment to create the best audio experience for your home theater. • When Audyssey™ Auto Setup procedure is performed, the MultEQ®, Dynamic EQ® and Dynamic Volume™ functions (vpage 13 ~15) are enabled. • Use the included setup microphone (DM-A409) to perform Audyssey Auto Setup procedure. • Measurements are performed by placing the calibrated microphone successively at multiple positions throughout the listening area as shown in GExample qH. For best results, it is strongly recommended to measure 6 positions so that the measurements have the proper spatial weighting. Even if the listening environment is small as shown in GExample wH, measuring at multiple points throughout the listening environment results in more effective correction. n When using Front Height Speakers GExample qH GExample wH FHL FL SW C FR FHR FHL FL SW C FR FHR n When Using the Front Wide Speakers GExample qH FL SW C FR GExample wH FL SW C FR FWL FWR FWL FWR ( : Measuring positions) *M *M SL SR SL SR FL : Front speaker (L) FR : Front speaker (R) FHL : Front height speaker (L) FHR : Front height speaker (R) FWL : Front wide speaker (L) FWR : Front wide speaker (R) C : Center speaker SW : Subwoofer SL : Surround speaker (L) SR : Surround speaker (R) SBL : Surround back speaker (L) SBR : Surround back speaker (R) Check the Measuring Results and Equalizer Type after Audyssey Auto Setup (Parameter Check) ( : Measuring positions) About the main listening position (*M) The main listening position refers to the most central position where one would normally sit within the listening environment. MultEQ® uses the measurements from this position to calculate *M *M speaker distance, level, polarity, and the optimum crossover value for the subwoofer. SL SR SL SR See overleaf