Denon 4306 Owners Manual - Page 26

Connecting Other Sources Connecting the antenna terminals An F-type FM antenna cable plug can be connected directly. Direction of broadcasting station AM loop antenna (Supplied) FM antenna 75 Ω/ohms Coaxial cable FM indoor antenna (Supplied) Connecting the XM terminal Connecting Other Sources • AVR-4306 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Connect-and-PlayTM (sold separately) and subscribing the XM service. • Plug the XM Connect-and-Play antenna into XM terminal on the rear panel. • Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal. For details, see "XM Satellite Radio" ( page 42). When making connections, also refer to the operating instructions of the XM Connect-and-Play antenna. XM Connect-and -Play Antenna XM GROUND AM outdoor antenna 2 AM loop antenna assembly Connect to the AM 1 2 antenna terminals. 3 Connection of AM antennas 1. Push the lever. 2. Insert the 3. Return the conductor. lever. NOTE: • Keep the power supply cord unplugged until the XM Connect-and-Play antenna connection have been completed. Remove the vinyl tie and take out the connection line. 4 a. With the antenna on top any stable surface. Mount Bend in the reverse direction. b. With the antenna attached to a wall. Installation hole Mount on wall, etc. NOTE: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 21