Denon 4306 Owners Manual - Page 76
Setting the HDMI In Assignment, Setting the Component In Assignment
UPC - 081757506861
View all Denon 4306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Advanced Setup - Part 1 Video Setup Make the video-related settings. Setting the HDMI In Assignment • This setting assigns the HDMI input terminals for different input sources. • Set the method for playing the audio signals included in the HDMI input signal. 4 Press the CURSOR D or H button to select the method for playing the audio signals included in the HDMI input signal, then press the CURSOR F or G button to select "AMP" or "TV". 1 Press the CURSOR D or H button to select "Video Setup" at the "System Setup Menu", then press the ENTER button. • The "Video Setup" menu screen appears. AMP: Play the audio signals on speakers connected to the AVR4306. TV: Play the audio signals on a TV connected to the AVR-4306. Advanced Setup - Part 1 • If a monitor is connected with an HDMI cable but the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor from the AVR-4306 (DVI mode). Press the STATUS button to check which mode is set for outputting HDMI signals from the AVR-4306 (HDMI and DVI modes). • Audio signals input from the analog and digital terminals are not output to the TV. • With HDMI, the video and audio signals are transferred simultaneously. When HDMI is assigned to an input source, the digital audio input assignment switches to HDMI along with the video input. When this setting is made for input sources to which a digital audio input (DENON LINK, OPTICAL etc.) is previously assigned, the digital audio assignment is set to HDMI. In this case, reassign the digital input using the procedure described at "Digital In Assign" ( page 67) . • It is not possible to make the "HDMI In Assign" settings for the function assigned at "iPod Assign". 2 Press the CURSOR D or H button to select "HDMI In Assign", then press the ENTER button. • The "HDMI In Assign" screen appears. 5 Press the CURSOR D or H button to select the input for the playback of signals when the audio signal of HDMI can not be reproduced, then press the CURSOR F or G button to select the input signal (ANALOG or EXT. IN). Setting the Component In Assignment This setting assigns the component video input terminal of the AVR-4306 for the different input sources. 1 Press the CURSOR D or H button to select "Component In Assign" at the "Video Setup" menu, then press the ENTER button. • The "Component In Assign" screen appears. 3 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select the input terminal. Select from among HDMI1 to 3. If the same HDMI input terminal is selected, the setting for the input source that was previously assigned switches to "NONE". When the audio signal of HDMI has become unlocked, the unit automatically changes over to the set connector (ANALOG or EXT. IN). 1~3 correspond to each HDMI 1~3 input terminal. 6 Press the ENTER button to enter the setting. • The "Video Setup" menu reappears. 71