Denon AVP-A1HDCI Owners Manual - English - Page 23

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Antenna terminals An F-type FM antenna cable plug can be connected directly. AM/FM Direction of broadcasting station AM loop antenna (small, supplied) FM antenna (White) (Black) 75 Ω/ohms Coaxial cable FM indoor antenna (supplied) HD Radio™ broadcast HD Radio broadcast is a service that is only available within the United States. Direction of broadcasting station FM antenna AM loop antenna (large, for HD Radio broadcasting, supplied) • To prevent interference, install at least 3.3 feet/ 1 m away from the antenna connected to the AVP-A1HDCI's other AM tuner terminal. 75 Ω/ohms Coaxial cable FM indoor antenna (dipole, for HD Radio broadcasting, supplied) (White) (Black) AM outdoor antenna Ground Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. AM loop antenna assembly Remove the vinyl tie and take out the connection line. a. With the antenna on top of any stable surface. Mount Connect to the AM antenna terminals. Ground AM outdoor antenna Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Bend in the reverse direction. b. With the antenna attached to a wall. NOTE • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. Installation hole Mount on wall, etc. 20