Denon AVR-1610 Owners Manual - English - Page 19

Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications ENGLISH Antenna terminals Direction of broadcasting station FM antenna 75 Ω/ohms Coaxial cable FM indoor antenna (supplied) Connecting Devices not Equipped with HDMI connectors n Connection of AM antennas 1 Push the lever. AM loop antenna (supplied) 2 Insert the conductor. 3 Return the lever. Once Connections are Completed Turning the Power On 1 Press . The power indicator lights red and the power is set to the standby mode. 2 Press . The power indicator flashes green and the power turns on. Black White Ground AM outdoor antenna n AM loop antenna assembly 1 Remove the vinyl tie and take out the connection line. 2 Bend in the reverse direction. 3-1With the antenna on top of any stable surface. Mount 3-2With the antenna attached to a wall. NOTE • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. Connecting the Power Cord b Also press when in standby mode, the power turns on. When has been pressed, the input source set with the is set. If a has been pressed, the input source stored in the memory for the quick select function is set (vpage 45 "Saving frequently used settings (Quick Select Function)"). Wait until all connections have been completed before connecting the power cord. To household power outlet (AC 120 V, 60 Hz) This operation can also be performed by pressing a on the main unit. Power cord Turning the Power Off 1 Press . The power is set to the standby mode. Installation hole Mount on wall, etc. 2 Press . The power indicator turns off, and so does the power. NOTE Insert the AC plugs securely. Incomplete connections could cause noise. NOTE Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press to turn off the power, or unplug the power cord from the power outlet.