Denon AVR-1610 Owners Manual - English - Page 46
Checking the Status Information
View all Denon AVR-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications ENGLISH Adjusting the Sound Field Effect (Parameter) Restoring compressed audio to nearly pre-compressed conditions for playback (RESTORER) Default settings are underlined. • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. • This can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input. Setting contents OFF : Do not use RESTORER. Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs. Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources. Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs. • The default setting for "iPod" is "Mode3". All others are set to "OFF". • When set to something other than "OFF", " " is displayed. • This can also be set by pressing OFF during playback. Mode 1 Mode 2 (RESTORER 64) (RESTORER 96) Mode 3 (RESTORER HQ) Adjusting the audio delay time while watching the picture (Audio Delay) Default settings are underlined. Checking the Status (Information) Setting items Setting contents Status Select Source / Surround Mode / Input Mode / Decode Mode / HDMI Shows information about / Digital / Component / iPod Dock / Video Select / Source Level current settings. You can also display current status on the main unit's display each time you press . Audio Input Signal Surround Mode : The currently set surround mode is displayed. Shows information about Signal : The input signal type is displayed. audio input signals. fs : The input signal's sampling frequency is displayed. Format : The number of channels in the input signal (front, surround, LFE) is displayed. Offset : The dialogue normalization correction value is displayed. Flag : This is displayed when inputting signals including a surround back channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix signals, "DISCRETE" with DTS-ES Discrete signals. HDMI Information HDMI Signal Information Shows information about • Resolution / Color Space / Pixel Depth HDMI input signals and HDMI Monitor Information monitor. • Interface / Suport Resolution Auto Surround Mode Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH Shows information about auto surround mode settings. Quick Select Shows information quick select settings. Quick Select 1 / Quick Select 2 / Quick Select 3 about • Name / Input Source / Video Select / Volume Level / MultEQ / Dynamic EQ / Dynamic Vol / Front SP / Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH Preset Channel A 1 ~ G 8 Shows information about • TUNER preset channels. Setting contents 0ms ~ 200ms • If you wish to adjust the "Audio Delay" while playing HDMI or component video signals, press u to set "OSD" to "OFF". This way the audio delay can be adjusted while watching the picture. (Press the u again. The display switches to the display of the menu screen only.) • This cannot be adjusted when playing in the DIRECT or STEREO mode (with "Front Speaker" set to "Large", "Tone Control" to "OFF" and "MultEQ" and "RESTORER" to "OFF"). • When the Auto Lipsync Correction function is operating, you can set within the range 0 ~ 100 ms. • Store "Audio Delay" for each input source. 43 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu