Denon AVR-1610 Owners Manual - English - Page 60
Restoring all the settings to as they were at the, time of purchase, Resetting the Microprocessor - microprocessor reset
View all Denon AVR-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications ENGLISH GHDMIH Symptom HDMI audio signals are not output from speakers. Cause Countermeasure • The "Manual Setup" - "HDMI • Set to "Amp" Setup" - "HDMI Audio Out" setting is set to "TV" Page 27 No picture • The connections to the HDMI • Check the connections. appears connectors are faulty. with HDMI • HDMI input setting is improper. • Check the HDMI input setting. connections. • The monitor is not compatible • Connect a monitor that is with copyright protection compatible with copyright (HDCP). protection (HDCP). • The HDMI format of the player • Match the HDMI format of the and monitor do not match. player and monitor. No sound is output from the monitor connected with HDMI connections. • The "Manual Setup" - "HDMI • Set to "TV". Setup" - "HDMI Audio Out" setting is set to "Amp". When performing • H DMI's CEC the following operating. operations on a connected device, AVR-1610 has the same operations. ⋅ Power ON/OFF ⋅ S witching audio output devices ⋅ A djust volume ⋅ S witch input source function is • Set "Manual Setup" - "HDMI Setup" -- "HDMI Control" to "OFF". When you only want to operate the power on/off each device, set "Power Off Control" to "OFF". GiPodH Symptom iPod cannot be played. Cause Countermeasure • The input source assigned to • Switch to the input source "iPod Dock" is not selected. assigned at "iPod Dock". • Cable is not properly connected. • Reconnect. • Control dock for iPod's AC • Plug the control dock for iPod's adapter is not connected to AC adapter into a power outlet. power outlet. 13 31 12 12 27 27 Page 31 14 - Restoring all the settings to as they were at the time of purchase (Resetting the Microprocessor) Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. 1 Turn off the power using on the main unit. 2 Press while simultaneously pressing and on the main unit. 3 Once the display starts flashing at intervals of about 1 second, release the two buttons. If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. 57