Denon AVR 2805 Owners Manual - Page 40
Auto Tuner Presets - avr2805s
UPC - 081757506076
View all Denon AVR 2805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
NOTE: Down-converting from the component video signal to the S-Video and composite video signal is not possible, so when not using the component video monitor output terminal connect the player using the S-Video or composite video input terminal. Cautions on the video conversion function: When the component video terminals are used to connect the AVR-2805/985 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-2805/985 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes. If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR2805/985 and the VTR, or if your VTR has a TBC function, turn it on. 4 Enter the setting. The Input Setup Menu reappears. (Remote control unit) 3-5 Auto Tuner Presets Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8, E1 to 8, F1 to 8 and G1 to 8. NOTE: • If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. 1 Select "Auto Tuner Presets"at the Input Setup Menu. (Remote control unit) *Input Setup Auto Tuner 2 Display the Auto Preset Memory screen. (Remote control unit) *Auto Tuner Start :Yes 3 Press the CURSOR left button to select "Yes". "Search" flashes on the screen and searching begins. "Completed" appears once searching is completed. The display automatically switches to screen. (Remote control unit) 40