Denon AVR-4311CI Owners Manual - English - Page 90

Simple version Basic version Setting items LFE Adjust the low-frequency effects level (LFE). Center Image Assign center channel signal to front left and right channels for wider sound. Panorama Assign front L/R signal also to surround channels for wider sound. Dimension Shift sound image center to front or rear to adjust playback balance. Center Width Assign center channel signal to front left and right channels for wider sound. Delay Time Adjust delay time to control sound stage size. AFDM (Auto flag detect mode) Detect the source's surround back channel signal and set the optimum surround mode automatically. -10dB - 0dB Setting details For proper playback of the different sources, we recommend setting to the values below. • Dolby Digital sources : "0dB" • DTS movie sources : "0dB" • DTS music sources : "-10dB" 0.0 - 1.0 (0.3) ON : Set. OFF : Do not set. 0 - 6 (3) 0 - 7 (3) 0ms - 300ms (30ms) ON : Set. OFF : Do not set. [Example] Playing Dolby Digital software (with EX flag) • When "AFDM" is set to "ON", the surround mode is automatically set to the DOLBY D + PLgx C mode. • To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and "Surround Parameters" - "Surround Back" to "MTRX ON". Some Dolby Digital EX sources do not include EX flags. If the playback mode does not switch automatically even when "AFDM" is set to "ON", set "Surround Parameters" - "Surround Back" to "MTRX ON" or "PLgx CINEMA". AUDIO/VIDEO ADJUST Setting items Surround Back Sets the method of generating of the surround back channel. Setting details nn For 2-channel sources ON : The surround back channel is used. OFF : No signal is played from the surround back channels. nn For multi-channel sources Set the decoding method for the surround back channel. DSCRT ON : Play the surround back signals included in the 7.1-channel source. MTRX ON : Generate and play the surround back channel signals from the surround channel signals by means of the Dolby Digital EX decoder. ES DSCRTz1 : Play the surround back signals included in the 6.1-channel DTS source. ES MTRXz2 : Generate and play the surround back channel signals from the surround channel signals of the DTS source by means of the DTS-ES decoder. ONz3 : Convert the 5.1-channel source of the DTS-HD input signals to the 7.1-channel output recommended by DTS and then play. PLgx CINEMAz4 : Generate and play the surround back signals by decoding the signals in the Dolby Pro Logic gx Cinema mode. PLgx MUSIC : Generate and play the surround back signals by decoding the signals in the Dolby Pro Logic gx Music mode. OFF : Do not play the surround back channel. z1 This can be selected when playing DTS sources including a signal to identify discrete 6.1-channel signals. z2 This can be selected when playing DTS sources. z3 This can be selected when playing the 5.1-channel source of DTS-HD. z4 This can be selected when "Speaker Config." - "Surround Back" (vpage 96) is set to "2 spkrs". • This can also be set by pressing STANDARD. • If the source being played contains a surround back signal, the decoder type is automatically selected by the AFDM function. Set "AFDM" to "OFF" to switch to your preferred decoder. NOTE If the setting in "Speaker Config." - "Surround Back" (vpage 96) is "None", "Surround Back" is not displayed. Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 87