Denon AVR 889 Owners Manual - English - Page 32

ENGLISH Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications Option Setup Make various other settings. s Volume Control Set the MAIN ZONE volume setting. d Source Delete Remove input sources that are not used from the display. F Menu screen F 2.Manual Setup 1.Speaker Setup 2.HDMI Setup 3.Audio Setup 4.ZONE2 Setup 5.Option Setup 2-5.Option Setup 1.Amp Assign 2.Vol.Control 3.Source Delete 4.On-Screen Display 5.Quick Select Name 6.Remote ID Setup 7.Display 8.Setup Lock a Amp Assign Define how the amplifier for the surround back speaker channels is used. The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the MAIN ZONE) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections). [Selectable items] 7.1ch : The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. ZONE2 : When ZONE2 power is on, ZONE2 sound is emitted from the speaker connected to the SURR. BACK/AMP ASSIGN terminal. FrontA Bi-Amp : The Front A channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. FrontB Bi-Amp : The Front B channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals. Volume Limit Make a setting for maximum volume. [Selectable items] OFF : Do not set a maximum volume. -20dB : Set the maximum volume to -20 dB. -10dB : Set the maximum volume to -10 dB. 0dB : Set the maximum volume to 0 dB. Power On Level This sets the volume set when the MAIN ZONE's power is turned on. [Selectable items] Last : Use the memorized setting from the last session. - - - : Always use the muting on condition when power is turned on. [Variable range] -80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB. Mute Level This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. [Selectable items] Full : The sound is cut off entirely. -40dB : The sound is attenuated by 40 dB. -20dB : The sound is attenuated by 20 dB. [Selectable items] ON : Use this source. Delete : Do not use this source. Default Reset the settings to the default values. NOTE • Input sources being used in the various zones cannot be deleted. • Input sources set to "Delete" cannot be selected using SOURCE SELECT. f On-Screen Display Make on-screen display related settings. See page 8 for more information on on-screen displays due to input signals. Screensaver Make screensaver settings. Use the screensaver to prevent burn-in on the monitor screen. When set to "ON", the screensaver is activated if there is no activity for about 3 minutes. [Selectable items] ON : A ctivate the screensaver if there is no activity for about 3 minutes. OFF : T urn the screensaver function off. When "Screensaver" is set to "ON", the screensaver is activated if no operation is performed for about 3 minutes. When you press uio p, the screen saver is cancelled and the screen before that screen saver started is displayed. For details, see "Amp Assign / Multi-zone Connections and Operations" (vpage 60 ~ 62). Text Input source and mode display. [Selectable items] ON : T urn display on. OFF : T urn display off. 29 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (vpage 17).