Denon AVR 889 Owners Manual - English - Page 77

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications Specifications n Audio section • Power amplifier Rated output: Front (A, B): 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround Back: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Dynamic power: 120 W x 2ch (8 Ω/ohms) 170 W x 2ch (4 Ω/ohms) Output connectors: Front: A or B 6 ~ 16 Ω/ohms A + B 12 ~ 16 Ω/ohms Center, Surround, Surround Back: 6 ~ 16 Ω/ohms • Analog Input sensitivity / Input impedance: 200 mV / 47 kΩ/kohms Frequency response: 10 Hz ~ 100 kHz - +1, -3 dB (DIRECT mode) S/N: 100 dB (IHF-A weighted, DIRECT mode) Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode) Rated output: 1.2 V • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.03 % (1 kHz, 3 V) n Video section • Standard video connectors Input / output level and impedance: Frequency response: • S-Video connectors Input / output level and impedance: Frequency response: • Color component video connector Input / output level and impedance: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB (when video convert set to "OFF") Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB (when video convert set to "OFF") Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB / CB signal - 0.7 Vp-p, 75 Ω/ohms PR / CR signal - 0.7 Vp-p, 75 Ω/ohms Frequency response: 5 Hz ~ 100 MHz - +0, -3 dB (when video convert set to "OFF") ENGLISH n Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB MONO 0.15 % STEREO 0.3 % [AM] 520 kHz ~ 1710 kHz 18 µV n General Power supply: Power consumption: Maximum external dimensions: Weight: AC 120 V, 60 Hz 5.5 A 0.1 W (Standby) 434 (W) x 171 (H) x 414 (D) mm (17-3/32" x 6-47/64" x 16-19/64") 12.3 kg (27 lbs 12.5 oz) n Remote control unit (RC-1099) Batteries: R6/AA Type (two batteries) Maximum external dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64" x 9-9/16" x 53/64") Weight: 184 g (Approx 6.5 oz) (including batteries) z For purposes of improvement, specifications and design are subject to change without notice. 74