Denon AVR-890 Owners Manual - English - Page 12

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Converting Input video signals for Output (Video Conversion Function) The AVR-890 is equipped with four types of video input/output terminals (HDMI, Component video, SVideo and video). Use the terminals according to the devices to be connected. This function automatically converts various formats of video signals input to the AVR-890 into the format used to output the video signals from the AVR-890 to a monitor. Video device AVR-890 Monitor Output HDMI connector Input (IN) HDMI connector Output (MONITOR OUT) HDMI connector Input HDMI connector Set as Necessary • Set when using the video conversion function. "Video Convert" (vpage 36) • Set when changing the resolution of the video signal. "Resolution" (vpage 36) Important Information Resolutions of HDMI-compatible TVs can be checked at "HDMI Information" (vpage 51). NOTE • HDMI signals cannot be converted into analog signals. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. • 480p/576p/1080i/720p/1080p component video input signals cannot be converted into S-Video or Video format. n Examples of GUI menu • Menu screen • Status display screen When the input source is switched When the volume is adjusted Component video connectors S-Video connector Component video connectors S-Video connector Component video connectors S-Video connector Component video connectors S-Video connector MENU Audio/Video Adjust Information Auto Setup Manual Setup Input Setup Video connector Video connector Video connector Video connector : When 480i/576i signals are input Adjust various audio and video parameters Input Mode DVD STEREO Auto Master Volume -80.0dB Status display: The operating status is displayed temporarily on the screen when the input source is switched or the volume is adjusted. • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal input to the AVR-890's HDMI terminal is the resolution set at "Resolution" (vpage 36). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.)