Denon AVR-890 Owners Manual - English - Page 30

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Making detailed settings (Manual Setup) Use this procedure to change Audyssey™ Auto Setup settings or to change the various audio, video and display settings. The set can be used without changing these settings. Make these settings as necessary. For a description of "Menu Map" and operating instructions, see page 20. n Items that can be set with the Manual Setup procedure Making the speaker settings (Speaker Setup) Default settings are underlined. Use this procedure to set the speakers manually or if you wish to change the settings made with Audyssey Auto Setup. Making the speaker settings (Speaker Setup) vpage 27 Making the HDMI settings (HDMI Setup) vpage 30 Making the audio settings (Audio Setup) vpage 30 Making the ZONE2 settings (ZONE2 Setup) vpage 31 Making other settings (Option Setup) vpage 32 n Examples of Menu Screen Displays Speaker Setup HDMI Setup MANUAL SETUP SPEAKER SETUP MANUAL SETUP HDMI SETUP Amp Assign Speaker Config. Bass Setting Distace Channel Level Crossover Frequency Front Speaker Setup RGB Range Auto Lip Sync Audio Out HDMI Control Normal ON AMP OFF Audio Setup MANUAL SETUP AUDIO SETUP EXT.IN SW Level 2ch Direct/Stereo Auto Surround Mode EQ Customize Assign surround back AMP for other use RETURN Return Use video range from 16 (black) to 235 (white) Set subwoofer playback level in EXT. IN mode ZONE2 Setup Option Setup MANUAL SETUP ZONE2 SETUP MANUAL SETUP OPTION SETUP Level Lch Level Rch Volume Display Volume Limit Power On Level Mute Level 0dB 0dB Relative OFF Last Full Volume Control Source Delete On-Screen Display Quick Select Name Zone Rename Trigger Out Remote ID Setup 232C Port RETURN Return Adjust the left channel output level Make settings for volume control Setting items Setting contents Amp Assign Normal : The surround back channel audio signals are output. Sets the signal output to the ZONE2 : The ZONE2 audio signals are output. speaker connected to the Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp SURR. BACK/AMP ASSIGN playback of the front A speakers. terminals. Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front B speakers. Front Height : The front height channel audio signals are output. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use of a large speaker that can adequately play back low and size. frequencies. (bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. If "Subwoofer" is set to "No", "Front" is automatically set to "Large". Center : Set the presence and size of the center speaker. • Large : Use of a large speaker that can adequately play back low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. NOTE • "Large" is not displayed when "Front" is set to "Small". Select "Large" or "Small" not according to the physical size • Even if "Center" has been set to "Large", when "Front" is set to "Small", the "Center" setting automatically switches to "Small". of the speaker but according Subwoofer : Set the presence of a subwoofer. to the low frequency • Yes : Use a subwoofer. reproduction capabilities • No : Select when a subwooofer is not connected. based on the frequency set When "Front" is set to "Small", "Subwoofer" can automatically set at "Crossover Frequency" to "Yes". (vpage 29). 2 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu