Denon AVR2307CI Owners Manual - English - Page 46

ENGLISH Advanced Operation [FUNCTION] [CHANNEL] [VOLUME] [MODE SELECTOR 1] [MODE SELECTOR 2] Outputting a program source to amplifier, etc., in the ZONE2 room (ZONE2 SELECT mode) 1 Press to display the "ZONE2 SOURCE" on the display. ZONE2 RECOUT 2 With "ZONE2 SOURCE" displayed, turn to select the source you want to output appears on the display. • The " -2" indicator and the indicator for the selected source light. 3 Start playing the source to be output. For operating instructions, refer to the manuals of the respective components. Advanced Operation Remote control unit operations during multisource playback This is only possible when the main unit in the ZONE2 mode ( page 58). 1 Set [MODE SELECTOR 1] to the "AUDIO". 2 Set [MODE SELECTOR 2] to the "ZONE2". 3 Press [ZONE2 ON]. • The " " indicator lights. To cancel the ZONE2 mode: Press [ZONE2 OFF]. 4 Press [FUNCTION]. • The " -2" indicator and the indicator for the selected source light. • The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CD-R/TAPE recording output terminals. • Digital signals are not output from the ZONE2 audio output terminals. • About the MULTI ZONE connections ( page 42). The ZONE2 source switches directly. 5 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing [VOLUME]. Default setting (ZONE2 volume level): - - - dB (Minimum) 6 When the ZONE2 SOURCE function is set to "TUNER", the preset channel can be selected pressing [CHANNEL]. [ZONE2 OFF ] [ZONE2 ON ] [MAIN ON/OFF] [FUNCTION] • When using ZONE2, it is possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ON/OFF]. About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 43 ENGLISH