Denon AVR2307CI Owners Manual - English - Page 48

ENGLISH Advanced Setup - Part 1 System setup items and default values 1. Auto Setup/Room EQ Items 1 Auto Setup The AVR-2307CI performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting. 2 Room EQ Setup Set the Room Equalizer setting with "All" or "Assign" for each surround mode. 3 Direct Mode Setup Set the ON/OFF setting of Room Equalizer, in the case of the surround mode is in "DIRECT" or "PURE DIRECT". Default settings - All, Room EQ = OFF OFF Page 10 ~ 13 63 64 2. Speaker Setup 1 Speaker Configuration 2 Subwoofer Setup 3 Distance 4 Channel Level 5 Crossover Frequency Items Automatically set the output component and properties for the various channels according to the combination of speakers to be actually used for surround playback. Front Sp. Large Select the method of playback of the subwoofer for playing the low bass signals. This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. Front L & R 12 ft (3.6 m) Front Front Set the volume of the various speakers so that the sound output from the L R speakers and the subwoofer seems to have the same volume level. 0 dB 0 dB Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. Default settings Center Sp. Subwoofer Surround Sp. Small Yes Small Surround Back Sp. Small / 2spkrs LFE Center Subwoofer Surround L & R Surround Back 12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 10 ft (3.0 m) Center Surround L Surround R Surround Back L Surround Back R Subwoofer 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 80 Hz Page 60 61 61 62 63 45 ENGLISH