Denon AVR2307CI Owners Manual - English - Page 62
Setting the Setup Lock, Setting the Trigger Out - avr zone 2
UPC - 081757507103
View all Denon AVR2307CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
ENGLISH Advanced Setup - Part 1 Setting the Trigger Out 1 Use the DC 12 V output of the AVR-2307CI's two trigger out jacks in association with the various input sources and surround modes. If "ZONE = MAIN" is selected, settings can be made for the individual 2 surround modes. 1 Press D H to select "Trigger Out", then press ENTER. 3 2 Press D H to select the trigger out jacks, then press ENTER. 3 Press F G to select "MAIN" or "ZONE2". 4 The power supplied from the trigger out jack turns on and off when the power for the set zone is turned on and off. 5 4 Press D H to select the input source, then press F G to set. ON, OFF: When that input source is selected, the power supplied from the trigger out jack turns on (or off). 5 When "MAIN" was selected at step 3: Press D H to select the surround mode, then press F G to set. ON: If "ON" is selected when an input source set to "ON" is selected, the power supplied from the trigger out jack turns on. OFF: If "OFF" is selected when an input source set to "ON" is selected, the power supplied from the trigger out jack turns off. 6 Press ENTER. 59 ENGLISH Advanced Setup - Part 1 Setting the Setup Lock This sets whether or not to lock the system setup settings so that they cannot be changed. 1 Press D H to select "Setup Lock", then press ENTER. 2 Press F to select "ON", then press ENTER. 1 2 • When the setup lock function is activated, the settings listed below cannot be changed, and "SETUP LOCKED!" is displayed when related buttons are operated. • System setup settings • Surround parameter settings • Tone control settings • Channel level settings (including test tones) • Room EQ settings • To unlock, press SYSTEM SETUP again and display the "Setup Lock" screen, then select "OFF" and press ENTER.