Denon AVR2310CI Owners Manual - Page 23

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Once Connections are Completed Turning the Power On 1 Press . The power indicator lights red and the power is set to the standby mode. 2 Press . The power indicator flashes green and the power turns on. b Also press when in standby mode, the power turns on. Front When has been pressed, the input source set with the is set. If a has been pressed, the input source stored in the memory for the quick select function is set (vpage 55 "Saving frequently used settings (Quick Select Function)"). Selecting the Input Source There are three ways to select the input source, as described below. q Selecting the input source using the Source Select menu (GUI menu) w Selecting the input source using the SOURCE SELECT button (Main remote control unit) e Selecting the input source using the (Main unit) q Using the Source Select Menu The input source can also be selected using the source selection menu. 1 Set to "MAIN/TV" to "MAIN". 2 Press . Display the "Source Select" menu. • Use the device selection buttons on the main remote control unit to set the device to be operated beforehand. • Input sources that are not going to be used can be set ahead of time. Make this setting at "Source Delete" (vpage 33). • To turn off the source selection menu without selecting an input source, press again. w Operating on the Main Remote Control Unit 1 Set to "MAIN/TV" to "MAIN". 2 Press the SOURCE SELECT button (vpage 7). The desired input source can be selected directly. Front Rear q SOURCE SELECT :SAT/CBL This operation can also be performed by pressing a the main unit. w on Recent Source Select E N T E R Enter e Turning the Power Off 1 Press . The power is set to the standby mode. Front 2 Press . The power indicator turns off, and so does the power. NOTE • Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when traveling, either press to turn off the power, or unplug the power cord from the power outlet. • When the ZONE2 power is switched on, and you want to switch off the MAIN ZONE power, press . qInput Source : The name of the highlighted input source is displayed. wRecently used sources : The currently selected input source is highlighted. eIcons for the input sources in the different categories are displayed. Video : (SAT/CBL), (TV), (VCR), (DVR), (V.AUX) Player : (HDP), (DVD), (CD), (PHONO) Tuner : iPod : (TUNER), (SIRIUS) b " " is displayed when using a Control Dock for iPod. 3 Use uio p to select the input source icon, then press . The input source is set and the source selection menu is turned off. e Operating on the Main Unit Turn . b If "Tuning Preset" mode is selected for the input source, press before turning . 20