Denon AVR2310CI Owners Manual - Page 42

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Changing the Input Source's Input Mode and Decoding mode (Input Mode) Default settings are underlined. The selectable input modes depend on the input source and "Input Assign" setting (vpage 37 "Changing the input sources assigned to the input terminals"). Setting items Setting contents Input Mode Auto : Automatically detect input signal and perform playback. Set the audio input modes for HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS) the different input sources. Digital : Play only signals from digital input. Analog : Play only signals from analog input. EXT. IN : Play only signals from EXT. IN input. b Upon purchase, the settings of the different input sources are as shown below. Input source Default setting DVD HDP TV SAT/CBL VCR Auto HDMI Digital Auto Analog Input source Default setting DVR V.AUX CD TUNER Auto Auto Analog Analog • T he "HDMI" settings are made for input sources for which HDMI input terminals are assigned at "Input Assign" (vpage 37). • T he "Digital" settings are made for input sources for which digital input terminals are assigned at "Input Assign" (vpage 37). • W hen a digital signal is properly input, the " " indicator lights on the display. If the " " indicator does not light, check the digital input connector assignment and the connections. • T he surround mode cannot be set if the input mode is set to "EXT. IN". • This can also be set by pressing . Each time you press the button, the input mode display will change. Making the input settings (Input Setup) Setting items Setting contents Decode Mode Set the input decoding mode. Auto : Detect type of digital input signal and decode and play source's automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This can be set for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 37). • Normally set this to "Auto". Changing the Input Source's Display Name (Rename) Default settings are underlined. Use this procedure to change the display name of the currently selected input source. Setting items Setting contents Rename 1. Use o p to set the cursor to the character you want to change. Change the input source's 2. Use ui to change the character, then press . display name to the desired • Up to 8 characters can be input. name. • The input character type can be switched by pressing while the display name is being changed. • The types of characters that can be input are as shown below. GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ GLower case charactersH abcdefghijklmnopqrstuvwxyz GSymbolsH GNumbersH 0123456789 (Space) Default Yes : Reset to the defaults. The changed display names No : Do not reset to the defaults. are reset to the defaults. Auto EXT. IN HDMI Digital Analog 39 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu