Denon AVR2310CI Owners Manual - Page 41

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications Making the video settings (Video) Default settings are underlined. The items that can be set depend on the input source and the "Input Assign" setting. Setting items Setting contents Video Select Source : Play the picture and sound of the input source. Switch video input source DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input while listening to audio source to view. This can be set for individual input sources. signal. NOTE • It is not possible to select HDMI input signals. • When playing HDMI video input signals, the analog video signal of another input source cannot be selected for the HDMI video output. • Input sources for which "Delete" is selected at "Source Delete" (vpage 33) cannot be selected. • Input sources for which "None" is selected at "Input Assign" (vpage 37) cannot be selected. • This can also be set by pressing . • T o cancel, press to select "Source". Video Convert This can be set when the input source is DVD HDP TV SAT/CBL The input video signal is VCR DVR V.AUX . converted automatically in function of the connected ON : The input video signal is converted. TV (vpage 10 "Converting OFF : The input video signal is not converted. Input Video Signals for Output (Video Conversion • When a non-standard video signal from a game machine or some other Function)"). source is input, the video conversion function might not operate. In this case set "Video Convert" to "OFF". • When "Video Convert" is set to "OFF", the video conversion function does not work. In this case, connect the AVR-2310CI and TV with the same type of cable. i/p Scaler The input source's resolution is converted to the resolution set at "Resolution". This can be set to the DVD HDP TV SAT/CBL VCR input sources. OFF : Do not use i/p scaler function. Analog : Analog signals are converted to HDMI signals. DVR V.AUX Analog and HDMI : Both analog signals and HDMI signals are converted to the desired HDMI resolution. Resolution This can be set when the input source is set to DVD HDP TV Set the output resolution. Resolution A (Analog) : Analog Video Resolution H (HDMI) : HDMI SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything other than "OFF". AUTO : Detect monitor panel resolution and automatically set output resolution. 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the output resolution. ENGLISH Making the input settings (Input Setup) Setting items Setting contents Progressive Mode Select optimum progressive mode for video material. This can be set when the input source is set to DVD HDP TV SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything other than "OFF". AUTO : The video material is automatically detected and the appropriate mode is set. Video1 : Select mode suitable for video playback. Video2 : Select mode suitable for video and 30-frame film material playback. Aspect Set the aspect ratio of the video signal output from the HDMI terminal. This can be set when the input source is set to DVD HDP TV SAT/CBL VCR DVR V.AUX , and when "i/p Scaler" is set to anything other than "OFF". Normal : Output at 4:3 aspect ratio. Full : Output at 16:9 aspect ratio. Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 38