Denon D-M37SBK Owners Manual - English - Page 21

Getting Started Connections Setup Playback Setting the Timer Other Functions Troubleshooting Specifications TUNER Playback Tuning in Broadcast Stations Connect the antenna beforehand (vpage 10). 1 Press [TUNER] or to select the reception band. FM AUTO FM MONO AM GAbout the displayH When FM AUTO is selected AUTO" is displayed. When FM MONO is selected MONO" is displayed. When AM is selected The reception mode is not displayed. 2 Use or [TU -, TU +] to select the reception band. When a station is received, the "TUNED" indication will light. ENGLISH About the FM Broadcast Reception Status Display The "ST" indicator lights when receiving stereo broadcasts. If the signal is weak and stable stereo reception is not possible, select "FM MONO" to receive in monaural. About Switching the Tuning Mode and Preset Mode Use to perform the tuning and preset channel operations. Switch to the mode to be operated before operating. n To switch to the preset mode Press while pressing . The "PRESET" indicator flashes for about 5 seconds. n To switch to the tuning mode Press while pressing . The "TUNING" indicator flashes for about 5 seconds. Automatically Presetting FM Stations (Auto Preset) Up to 40 stations can be preset. Auto preset is not possible with AM broadcast stations. 1 Press [TUNER] to select "FM AUTO" or "FM MONO". 2 Press and hold in MENU/SET. The "AUTO PRESET" is displayed. 3 Press MENU/SET again. "Search" flashes and auto presetting starts. Broadcast stations whose antenna signal are weak cannot be preset automatically. If you wish to preset such stations, tune them in manually. • If the function is set to something other than "TUNER", press [TUNER] to switch the function to "TUNER" (vpage 24 "Auto Function Selector Function"). • The function can also be switched to "TUNER" using SOURCE. n To Tune Automatically Press and hold in or [TU -, TU +] to automatically search and tune in broadcast stations. b Stations whose signal is weak cannot be tuned in. n To Stop Auto Tuning Press or [TU -, TU +]. n To Tune Manually The reception frequency switches each time or [TU -, TU +] is pressed. A humming sound may be heard when using a TV nearby while receiving AM programs. If this happens, move the system as far from the TV as possible. n To Cancel Auto Presetting Press or [2]. The "Search" indicator turns off. Presetting FM/AM Stations Manually Up to 40 stations (total for AM and FM) can be preset. 1 Tune in the station. 2 Press [ENTER/MEMO]. The smallest non-registered preset number flashes. 3 Use , [CH -, CH +] or [o p] to select the number, then press [ENTER/MEMO]. The preset number, reception band and reception frequency are displayed. 17