Denon DN-C640 Operating Instructions - Page 13

ENGLISH (2) Rear panel 1. GENERAL INFORMATION 1 GND 2 HOT(+) 3 COLD(-) LEVEL R L FIXED VARIABLE SPDIF L L AES/EBU LEVEL R ANALOG OUTPUT R DIGITAL OUTPUT RS232C PARALLEL REMOTE x z cv bn m LAN , SERIAL NO. . z ANALOG (Balanced) OUTPUT • These are active balanced outputs using XLR type connections. The CD's or network's audio playback signals are output from these connectors. • Pin layout : 1. GND / 2. Hot / 3. Cold • Applicable connector : Cannon XLR-3-31 or equivalent. NOTE : • Do not short-circuit the hot or cold pin with the common pin. x LEVEL Control • Use these controls to adjust the level of the audio signals from the BALANCED OUT connectors. c ANALOG (Unbalanced) OUTPUT • These are unbalanced outputs using RCA type jacks. • VARIABLE Use the remote control unit or web GUI to adjust the output level. v DIGITAL (SPDIF) OUTPUT • This is a coaxial output using an RCA type jack. • Signal format : SPDIF(IEC-958 Type II ) or AES/EBU (select in menu) • Sampling frequency : 32 /44.1 /48 /Auto (select in menu) b DIGITAL (AES/EBU) OUTPUT • This is a balanced output using an XLR type jack. 1.Common / 2.Hot / 3.Cold. • Signal format : SPDIF(IEC-958 Type II) or AES/EBU (select in menu) • Sampling frequency : 32 /44.1 /48 /Auto (select in menu) • Applicable connector: cannon XLR-3-31 or equivalent n RS232C connector Connector for serial control from an external device. m PARALLEL connector Connector for parallel control from an external device. , LAN connector 10BASE-T and 100BASE-TX RJ-45 LAN terminal for network connection. . AC inlet Connect the included power cord here. 5