Denon DN-T625 Operating Instructions - Page 18

ENGLISH 21 PRESET FUNCTIONS AND OPERATIONS (1) List of Preset Functions • Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off. • The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback. • One of the preset functions can be used to display information on this set (microprocessor version). Preset function type Description Set upon shipment from factory No. Preset type Selection of preset type. Preset Type 1 1 Program 1 Setting of whether or not to play program 1. Program 1 OFF 2 Program 2 Setting of whether or not to play program 2. Program 2 OFF 3 Program 3 Setting of whether or not to play program 3. Program 3 OFF 4 Power on mode Setting of operation when power is turned on. Power On Stop 5 Time mode Setting of time mode when power is turned on. Time = ELAPSED 6 Random Setting of random mode when power is turned on. Random OFF 7 Finish mode Setting of operation when playback ends. Finish Stop 8 Next track standby Setting of whether or not to standby at the next track when the CUE button is pressed during playback. Next Stb. OFF 9 Next Track Reserve Setting of operation when select knob is turned during playback. Reserve. OFF 10 Play lock Selection of whether or not to inhibit the panel switches during playback. Play Lock OFF 11 Panel lock Auto cue Selection of whether or not to enable the panel buttons. Panel OFF 12 Setting of whether or not to perform operation and the audio startup level. the auto cue CueDet. -48 dB 13 Play speed Standard playing speed setting. Normal Speed 14 Text display Selection of time or text display. Text OFF 15 Frame display Selection of whether or not to display frames. FR Disp ON 16 E.O.M. Setting of whether or not to display the EOM and display time setting. E.O.M. 10 s 17 Auto stop Setting of whether or not to automatically stop the servo functions. Sleep 30 min 18 Preset function type Description Set upon shipment from factory No. RC cord IR remote Serial remote Parallel remote Parallel remote Relay (loop) cycle Preset clear Set information Play list (MP3) RC cord setting. Infrared remote control sensor setting. RC DENON 19 IR ON 20 Serial remote (9P D-Sub) setting. RS 232C 21 Selection of whether or not to accept parallel remote signals. Remote ENA 22 Fader start mode selection. Number of cycles for the relay mode. Fader Pause 23 Loop 5 24 Setting for clearing presets and setting them to the initial values. Ini. Preset 25 Microprocessor version display. Setting of whether or not to preform the play list. Ver. **** (* = number) 26 Play List OFF 27 (2) Presetting procedure 1 Press the stop (2) button u while presetting the TITLE button !0. 2 Turn the select knob !2 and select the preset item. 3 Press the select knob !2 to change the setting. 4 The preset mode is canceled when the stop (2) button u on CD is pressed. The setting are writeen at this time. 18