Denon DN-X1100 Owners Manual - Page 12
Replacing the Channel Fader, Flex Fader Crossfader Slide, Torque Adjustment Procedure
UPC - 883795000840
View all Denon DN-X1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started Connections Fader Start Specifications ENGLISH Replacing the Channel Fader The Channel fader may be removed without any disassembly of the DN-X1100 itself. 1 Pull out the Channel fader knob. 2 Remove the five outer screws attaching the channel fader plate and channel fader bracket assembly from the front panel. 3 Remove the two screws attaching the channel fader bracket assembly from chassis. 4 Pull the channel fader bracket assembly forward and unplug the 4P cable from the connector on the channel fader printing board. Flex Fader Crossfader Slide Torque Adjustment Procedure 1 Follow the procedure at "Replacing the Crossfader" to remove the Crossfader from the set. 2 Move the lever so that the head of the Screw is positioned at the hole in the case. 3 Turn the Screw using a screwdriver, move the lever and adjust to the desired torque. 4 Reinstall the Crossfader following the removal procedure in reverse order. 5 Install the replacement assembly by reversing above instructions. CCrroosssfadeerr ........Screw